ISI Papers:

 

  • Abbasi J, Ghaedi M, Riazi M, Mirzaei Paiaman A (2017), “Modified shape factor incorporating gravity effects for scaling countercurrent imbibition”, Journal of Petroleum Science and Engineering.

 

 

  • Sharifpour E, Escrochi M , Riazi M, Ayatollahi S (2016), "On the importance of gel rigidity and coverage in a smart water shutoff treatment in gas wells", Journal of Natural Gas Science and Engineering, 31:808-818.

 

 

  • Mohsenzadeh A, Escrochi M, Afraz M, Karimi G, Alwahaibi Y, Ayatollahi S (2016). "Non-hydrocarbon gas injection followed by steam - gas co-injection for heavy oil recovery enhancement from fractured carbonate reservoirs", Journal of Petroleum Science and Engineering, 144:121-130.

 

 

  • Lashkarbolooki M, Ayatollahi S, Riazi M (2016), “Mechanistical Study of Effect of Ions in Smart Water Injection into Carbonate Oil Reservoir”, Process Safety and Environmental Protection.

 

 

  • Abbasi J, Ghaedi M, Riazi M (2016), “Discussion on Similarity of Recovery Curves in Scaling of Imbibition Process in Fractured”, Porous Media Journal of Natural Gas Science and Engineering, 36:617-629.

 

 

  • Derikvand Z, Riazi M (2016), “Experimental Investigation of a Novel Foam Formulation to Improve Foam Quality”, Journal of Molecular Liquids, 224:1311-1318.

 

 

  • Abbasi J, Raji B, Riazi M, Kalantariasl A (2016), “A Simulation investigation of Performance of Polymer Injection in Hydraulically Fractured Heterogeneous Reservoirs”, Journal of Petroleum Exploration and Production Technology.

 

 

  • Lashkarbolooki M, Riazi M, Ayatollahi S (2016), “Investigation of Effects of Salinity, Temperature, Pressure, and Crude Oil Type on the Dynamic Interfacial Tensions”, Chemical Engineering Research and Design, 115:53-65.

 

 

  • Ghaedi M, Riazi M (2016), “Scaling equation for counter current imbibition in the presence of gravity forces considering initial water saturation and SCAL properties”, Journal of Natural Gas Science and Engineering, 34:934-947.

 

 

  • Kargozarfard Z, Riazi M, Ayatollahi S, Shahnazar nezhad khalesi S (2016), “Performance of Polyacrylamide/Cr(III) Gel Polymer in oil recovery from heterogeneous porous media, an experimental study”, Korean Journal of Chemical Engineering, 33:3350-3358.

 

 

  • Golkari A, Riazi M (2016), “ Experimental Investigation of Miscibility Conditions of Dead and Live Asphaltenic Crude Oil-CO2 Systems”, Journal of Petroleum Exploration and Production Technology, 6:1-13.

 

 

  • Lashkarbolooki M, Vaezian A, Zeinolabedini Hezave A, Ayatollahi S, Riazi M (2016), “Experimental investigation of the influence of supercritical carbondioxide and supercritical nitrogen injection on tertiary live-oil recovery”, The Journal of Supercritical Fluids, 117:260-269.

 

 

  • Doryani dariuni H, Malayeri , Riazi M (2016), “Visualization of asphaltene precipitation and deposition in a uniformly patterned glass micromodel”, Fuel, 182:613-622.

 

 

  • Abbaszadeh M, Naseri M, Riazi M (2016), “Experimental investigation of the impact of rock dissolution on carbonate rock properties in presence of carbonated water”, Environmental Earth Sciences, 75:1-6.

 

 

  • Riazi M, Golkari A (2016), “The Influence of Spreading Coefficient on Carbonated Water Alternating Gas Injection in a Heavy Crude Oil”, Fuel, 178:1-9.

 

 

  • Hassanpour chenarestan sofla S, Malayeri , Riazi M (2016), “Utilization of Co3O4 nanoparticles for reducing precipitation of asphaltene during CO2 injection”, Journal of Natural Gas Science & Engineering, 31:39-47.

 

 

  • Lashkarbolooki M, Ayatollahi S, Riazi M (2016), “Mechanistic Study on the Dynamic Interfacial Tension of Crude Oil + Water Systems: Experimental and Modeling Approaches”, Journal of Industrial & Engineering Chemistry, 35:407-416.

 

 

  • Lashkarbolooki M, Riazi M, Hajibagheri F, Ayatollahi S (2016), “Low Salinity Injection into Asphaltenic-Carbonate Oil Reservoir”, Mechanistical Study Journal of Molecular Liquids, 216:377-386.

 

 

  • Abbaszadeh M, Naseri M, Riazi M (2016), “Numerical Simulation of Counter Current Spontaneous Imbibition of Carbonated Water in Porous Media”, Journal of porous media 19:1-13.

 

 

  • Shakiba M, Ayatollahi S, Riazi M (2016), “Investigation of oil recovery and CO2 storage during secondary and tertiary injection of carbonated water in an Iranian carbonate oil reservoir”, Journal of Petroleum Science and Engineering, 137:134-143.

 

 

  • Lashkarbolooki M, Riazi M, Ayatollahi S, Zeinolabedini Hezave A (2016), “Synergy Effects of Ions, Resin, and Asphaltene on Interfacial Tension of Acidic Crude Oil and Low- High Salinity Brines”, Fuel, 165:75-85.

 

 

  • Lashkarbolooki M, Ayatollahi S, Riazi M (2015), “Correction to Effect of Salinity, Resin, and Asphaltene on the Surface Properties of Acidic Crude Oil/Smart Water/Rock System”, Energy & Fuels, 29:4665-4665.

 

 

  • Sharifpour E, Riazi M, Ayatollahi S (2015), “Smart Technique in Water shutoff treatment for Layered Reservoir through engineered injection/production scheme”, Industrial & Engineering Chemistry Research, 44:11236-11246.

 

 

  • Doryani dariuni H, Kazemzadeh Y, Parsaei R, Malayeri , Riazi M (2015), “Impact of asphaltene and normal paraffins on methane-synthetic oil interfacial tension: An experimental study”, Journal of Natural Gas Science and Engineering, 26:538-548.

 

 

  • Iraji B, Shadizadeh R, Riazi M (2015), “Experimental Investigation of CO2 Huff and Puff in a Matrix-Fracture System”, Fuel, 158:105-112.

 

 

  • Rabiei A, Sayyad H, Riazi M, Hashemi A (2015), “Determination of dew point pressure in gas condensate reservoirs based on a hybrid neural genetic algorithm”, Fluid Phase Equilibria, 387:38-49.

 

 

  • Kazemzadeh Y, Malayeri , Riazi M, Parsaei R (2015), “Impact of Fe3O4 nanoparticles on asphaltene precipitation during CO2 injection”, Journal of Natural Gas Science & Engineering, 22:227-234.

 

 

  • Kazemzadeh Y, Parsaei R, Riazi M (2015), “Experimental Study of Asphaltene Precipitation Prediction during Gas Injection to Oil Reservoirs by Interfacial Tension Measurement”, Colloids and Surfaces A Physicochemical and Engineering Aspects, 466:138-146.

 

 

  • Soorani S, Riazi M, Kazemzadeh Y, Fallahb H (2014), “A New Approach for Evaluating Migration of Nano Particles in Porous Media”, Journal of Dispersion Science and Technology.

 

 

  • Lashkarbolooki M, Ayatollahi S, Riazi M (2014), “Effect of Salinity, Resin, and Asphaltene on the Surface Properties of Acidic Crude Oil/Smart Water/Rock System”, Energy and Fuel, 28:6820-6829.

 

 

  • Lashkarbolooki M, Ayatollahi S, Riazi M (2014), “The Impacts of Aqueous Ions on Interfacial Tension and Wettability of an Asphaltenic-Acidic Crude Oil Reservoir during Smart Water Injection”, Journal of chemical and engineering data, 59:3624-3634.

 

 

  • Kazemzadeh Y, Riazi M (2014), “Investigating the Impact of Molecular Diffusion in Natural Gas Storage Process in an Iranian Depleted Fractured Oil Reservoir”, Journal of Gas Technology, 1:35-35.

 

 

  • Asadi zade gharejeloo S, Mohsenzadeh A, Escrochi M, Ayatollahi S, Roayaei E (2014), "Secondary and Tertiary Thermally Induced Gas-oil Gravity Drainage from Oil-wet Fractured Rocks: Experiments under Reservoir Conditions", Energy Sources, Part A36:1818-1826.

 

 

  • Zolghadr A, Escrochi M, Ayatollahi S (2013), "Temperature and Composition Effect on CO2 Miscibility by Interfacial Tension Measurement", Journal of Chemical and Engineering Data, 58:1168-1175.

 

 

  • Zolghadr A, Riazi M, Escrochi M, Ayatollahi S (2013), "Investigating the Effects of Temperature, Pressure, and Paraffin Groups on the N2 Miscibility in Hydrocarbon Liquids using the Interfacial Tension Measurement Method”, Industrial and Engineering Chemistry Research, 52:9851-9857.

 

 

  • Escrochi M, Mehranbod N, Ayatollahi S (2013), "The gas–oil interfacial behavior during gas injection into an asphaltenic oil reservoir", Journal of Chemical & Engineering Data, 58:2513-2526.

 

 

  • Maroufi P, Ayatollahi S, Rahmanifard H, Abdolhossein J, Riazi M (2013), “Experimental Investigation of Secondary and tertiary Oil Recovery from Fractured”, Porous Media J Petrol Explor Prod Technol, 3:179-188.

 

 

  • Kord S, Miri , Ayatollahi S, Escrochi M (2012), "Asphaltene deposition in carbonate rocks: Experimental investigation and numerical simulation", Energy and Fuels, 26:6186-6199.

 

 

  • Maroufi P, Rahmanifard H, Al-Hadrami H, Escrochi M, Ayatollahi S, Abdolhossein J (2012). "EXPERIMENTAL INVESTIGATION OF WETTABILITY EFFECT AND DRAINAGE RATE ON TERTIARY OIL RECOVERY FROM FRACTURED MEDIA", Journal of Porous Media, 15:1111-1123.

 

 

  • Sohrabi M, Ketchut N, Riazi M, Jamiolahmady M, Ireland , Robertson G (2012), “Coreflooding Studies to Investigate the Potential of Carbonated Water Injection as an Injection Strategy for Improved Oil Recovery and CO2 Storage”, Journal of Transport in Porous Media, 91:101-121.

 

 

  • Sohrabi M, Riazi M, Jamiolahmady M, Kechut , Ireland S, Robertson G (2011), "Carbonated Water Injection (CWI) – A Productive Way of Using CO2 for Oil Recovery and CO2 Storage", Energy Procedia 4:2192-2199.

 

 

  • Sohrabi M, Ketchut N, Riazi M, Jamiolahmady M, Ireland , Robertson G (2011), “Safe Storage of CO2 Together With Improved Oil Recovery by CO2-Enriched Water Injection”, Chemical Engineering Research and Design (Special Issue on Carbon Capture & Storage ) 89:1865-1872.

 

 

  • Riazi M, Sohrabi M, Bernstone , Jamiolahmady M, Ireland (2011), “Visualisation of mechanisms involved in Co2 injection and storage in hydrocarbon reservoir sand water-bearing aquifers”, Chemical Engineering Research and Design (Special Issue on Carbon Capture & Storage), 89:1827-1840.

 

 

  • Riazi M, Jamiolahmady M, Sohrabi M (2011), “Theoretical investigation of pore-scale mechanisms of carbonated water injection”, Journal of Petroleum Science and Engineering, 75:312-326.

 

 

  • Riazi M, Sohrabi M, Jamiolahmady M (2010), “Experimental Study of Pore-Scale Mechanisms of Carbonated Water Injection (CWI)”, Journal of Transport in Porous Media, 86:73-86.

 

 

  • Nabipour , Escrochi M, Ayatollahi S (2007), "Laboratory investigation of thermally-assisted gas–oil gravity drainage for secondary and tertiary oil recovery in fractured models", Journal of Petroleum Science and Engineering,55:77-82.